manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 97 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 97

E N T 7 0 3 0

Model Name:

RJ–4100

E N T 7 0 3 0

Model Name:

RJ–4100

Online/Function problems

When No Error is Displayed on the Printer's Liquid Crystal Display

1

• Printing position is offset

1-1

1-2

1-3

1-4

2-1

• Was the media recognized correctly?

→

Proper recognition is impossible if the media is mounted incorrectly. Please confirm after remounting the
media correctly.

Confirm:

Is the application (driver) media size set to a value that suits the printing range setting in the printer?

No:

Specify a value that suits the printing range setting in the printer.

Yes: Go to 1-3

Confirm:

Are the application drawing and driver origin aligned?

No:

Align the origin to a suitable position.

Yes: Go to 1-4 

Confirm:

Change the printing position and location method settings. Does this solve the problem?

Yes: Advise the use of a setting that solves the problem.
No:

Go to 2-1

Reference: For details concerning setting the origin, refer to the item on “Menu” in “Printer

settings and special functions” of the Operation Manual.

Procedure: Investigate the current printer connection environment and report a printout of the setting details,

together with printing data that will enable the symptoms to be verified, to your local dealer using the
prescribed format.

•

For how to take a print of the setting details, refer to “Control panel” in the Operation
Manual.

•

Data for printing should be able to be analysed by the printer. If it can not be dumped to a
file by the application and the driver, a data dump list from a comparatively simple diagram
will be satisfactory. (However, the data should enable the symptoms to be verified.)

•

Please include in the printer connection environment: the host computer, the application,
type of driver, the interface being used, length of cable, whether or not there is a switching
unit.

•

If possible, obtain a sample printout.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP7000

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Online/Function problems

97

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments