manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 141 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 141

E X A 1 2 5 0

Model Name:

RJ–4100

E X A 1 2 5 0

Model Name:

RJ–4100

Command Errors

When Message is Displayed

1

2

3

4

5

• MH01 Error (Undefined Command)

A command that is not defined in any
command mode has been analysed

• MH02 Error (Parameter Error)

Wrong number of parameters follow-
ing the command 

• MH03 Error (Numerical Error)

Wrong number of parameters follow-
ing the command 

• MH04 Error (Undefined Character

Set)
A nonexistent character set is present

• MH07 Error (Buffer Overflow)

The polygon buffer or the download-
able character buffer has overflowed

1-1

1-2

1-3

1-4

• Try communicating with the available computer and cable.

→

Contact your Mutoh local dealer.  

Confirm: Does the error occur when the RS-232C cable is changed?

→

There may be a broken signal lead in the RS-232C cable or the cable itself may be too
long for good communication.
Advise the use of a cable that gives good communication.

• Is there any record of an error in the printing data?

→

Try changing the type of application driver.

• If the symptoms persist despite various application driver changes

→

Obtain the printing data (Report to the your local dealer after you have obtained it).

• The main board assembly may be damaged.

→

Replace it.

No.

Symptom

Sequence

Items to be Confirmed

When Message is Displayed

Command Errors

1140

R E P

B A C

G O   T O   R e f .   P a g e s

141

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments