manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 148 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 148

E X A 1 7 2 0

Model Name:

RJ–4100

E X A 1 7 2 0

Model Name:

RJ–4100

Mechanical System Faults

When Message is Displayed

1

• E075 Error Sensor Fault 

This message indicates that condition
has occurred in which the origin can-
not be detected.

1-1

1-2

1-3

1-4

1-5

• Use the self-diagnostic “Sensor/Origin” and carry out the origin sensor test.

• the origin sensor assembly connection.

J205 (H ORIGN) on the main board.

→

Reconnect properly.

• Check Y cable connections

Are they inserted obliquely? Check.
J114 (HEAD1) on the main board and J201 (MAIN1) on the head board.

→

Insert them properly.

→

Replace the Y cable between J114 (HEAD1) on the main board and J201 (MAIN1) on
the head board.

• The origin sensor assembly may be faulty.

→

Replace it.

• The main board assembly may be damaged.

→

Replace it.

No.

Symptom

Sequence

Items to be Confirmed

When Message is Displayed

Mechanical System Faults

1360

1450

1140

1040

R E P

B A C

G O   T O   R e f .   P a g e s

148

CAUTION:

Main board assembly connector J114 (HEAD1) and head board
assembly connector J201 (MAIN1) should be plugged in securely.
The main board may be damaged if power is applied when they are
not properly connected.

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments