manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 35 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 35

E N T 1 0 5 0

Model Name:

RJ–4100

E N T 1 0 5 0

Model Name:

RJ–4100

Printer Status Messages

When Message is Displayed

1

• Roll Media End

This message is displayed when roll
media is being used and the trailing
edge of the media is detected.  It will
be cancelled by raising the lever.

1-1

• Is the roll media finished?

→

Replace the roll.

• Have cut media been mounted while roll media is selected? 

→

Mount roll media.

• Is the roll media floating?

→

Mount the media again.

• Does "Roll Media End" appear when the pressure lever is up?

→

If this is displayed, maintenance by a Serviceman is required. 

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP1000

No.

Symptom

Sequence

Items to be Confirmed

When Message is Displayed

Printer Status Messages

35

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments