365
B A C 2 0 8 0
Model Name:
RJ–4100
B A C 2 0 8 0
Model Name:
RJ–4100
How to Align Repeatability Printing Position
How to Align Repeatability Printing Position
This procedure is used to align black and color normal dot and micro dot repeatability printing positions. This involves making a bidirectional test print and from the results
adjusting the CCW printing delay (position and timing) by entering into the firware the differences between the CW printing position and the CCW printing position. There are
separate differences for both black and color normal dots and micro dots.
Bk err: -250
Menu Up
Cmy err: -250
Adjustment Print
AJST: Bidirectional alignment
DIAG: AJST
Bidirectional position adjustment for normal dots
Displayed during printing
Setting can be specified in units of
10
µ
m using the VALUE + and - keys
Press [ENTER] to update reciprocal difference
Setting can be specified in units of
10
µ
m using the VALUE + and - keys
Press [ENTER] to update the reciprocal difference
Print Start?
Press [ENTER]
without update
Menu Down
Menu Up
Menu Down
Menu Up
Menu Down
Press [ENTER]
after update
[ENTER]
If [ENTER] is pressed at “Cmy err:” and the parameter has been changed,
the black and color CCW printing delays (position and timing) will each be updated
in the firmware and another adjustment print will be made.
If the parameter was not changed, “Print Start?” will be displayed.
If [ENTER] is pressed, another print will be made.
If [Back] is pressed, the display will move to “AJST: Bidirectional (MD)”.
Bk err: -250
Menu Up
Cmy err: -250
Adjustment Print
AJST: Bidirectional (MD)
DIAG: AJST
Bidirectional position adjustment for micro dots
Displayed during printing
Setting can be specified in units of
10
µ
m using the VALUE + and - keys
Press [ENTER] to update reciprocal difference
Setting can be specified in units of
10
µ
m using the VALUE + and - keys
Press [ENTER] to update the reciprocal
difference
Print Start?
Press [ENTER]
without update
Menu Down
Menu Up
Menu Down
Menu Up
Menu Down
Press [ENTER]
after update
[ENTER]
If [ENTER] is pressed at “Cmy err:” and the parameter has been changed,
the black and color CCW printing delays (position and timing) will each be updated
in the firmware and another adjustment print will be made.
If the parameter was not changed, “Print Start?” will be displayed.
If [ENTER] is pressed, another print will be made.
If [Back] is pressed, the display will move to “AJST: CW”. (BAC2090)
→
Continued next page