manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 87 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 87

E N T 5 0 3 0

Model Name:

RJ–4100

E N T 5 0 3 0

Model Name:

RJ–4100

Problem Involving Noise

When No Error is Displayed on the Printer's Liquid Crystal Display

1

• Abnormal noise when media is fed

1-1

1-2

• Are paper scraps or foreign matter adhering to the pressure roller and grid roller?

→

Wipe the pressure roller with a soft damp cloth. (Refer to CON5010)

→

Clean the grid roller with a nylon brush. (Refer to CON5010)

• Is there any dirt or foreign matter obstructing the printing board and media transport path?

→

Remove any dirt and foreign matter.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP5000

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Problem Involving Noise

87

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments