manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 267 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 267

Lift up

Cutter Mat

Cutter Cap

Cutter Blade

Head

R E P 1 5 1 0

Model Name:

RJ–4100

R E P 1 5 1 0

Model Name:

RJ–4100

How to replace the Cutter Blade

How to replace the Cutter Blade

GO TO

TEST NO

1001

TEST6

Item

Replacement and Adjustment Procedure

1. Replacement

Procedure

267

CAUTION: Before starting work, be sure to disconnect

the power supply cable connector.

Replace the Cutter Blade

1. Pull the Head to the left.
2. Lift the Cutter Cap and slide it to the towards you.
3. Lift out the Cutter Blade.
4. Assembling is the reverse of the removal procedure.

CAUTION:

When the cutter blade is to be removed, the
head must first be moved to a position over
the cutter mat.
The tip of the cutter blade will be chipped
and no longer able to cut if it touches paper
guide F.

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments