manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 102 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 102

E N T 8 0 1 0

Model Name:

RJ–4100

E N T 8 0 1 0

Model Name:

RJ–4100

Other

When No Error is Displayed on the Printer's Liquid Crystal Display

1

• Power shutdown during printing

1-1

1-2

1-3

1-4

1-5

1-6

1-7

• Has the power supply breaker dropped out?

→

Raise the breaker and try again.
If it drops out again, disconnect the printer power cable and try lifting the breaker again.
If it still drops out, check for a power leakage other than the printer.

• Has the power plug come out the power outlet?

→

Insert the plug securely.

• Is the power cable about to come out of the socket on the main unit?

→

Please reconfirm after plugging in the power cable securely.

• Is there power at the power outlet?

→

Check the power supply.

• Is the AC power supply within the range 100 to 120 V ±10% or 200 to 240 V ±10%?

→

If not, provide power from a suitable outlet.

• Are there any large power-consuming peripheral devices, such as a copier, on the same outlet?

→

Take power from a separate power source. 

• The power cable may be broken. Replace it and try again.

❈

If the above procedures do not improve the symptoms, the power supply section connections may be faulty
or the power board etc. may have developed a fault.

Go to MAP8000

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Other

102

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments