manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 243 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 243

Fastening
Screws

Flexible 
Guide 
Fixer C

Ink ID Sensor Connector

Detector assembly connector

Y Rail Cover
Support

Fastening 
Screws

R E P 1 3 3 0

Model Name:

RJ–4100

R E P 1 3 3 0

Model Name:

RJ–4100

How to replace the Cartridge Frame Assembly

How to replace the Cartridge Frame Assembly

GO TO

TEST NO

1002

TEST8

Item

Replacement and Adjustment Procedure

1. Replacement

Procedure

243

Replace the Cartridge Frame Assembly

1. Carry out Head Cleaning.

(Refer to REP1620)

2. Take out all cartridges.
3. Remove the right paper guide. (Refer to REP1040)
4. Disconnect junction board connectors J402 (Detector BK),

J403 (Detector C), J404 (Detector M), J405 (Detector Y) and
J406 (Ink ID BK), J407 (Ink ID C), J408 (Ink ID M), J409 (Ink
ID Y).

(Refer to REP1470)

5. Remove the Panel Cover.

(Refer to REP1030)

6. Remove the Front Cover.

(Refer to REP1020)

7. Remove the Y Rail Cover.

(Refer to REP1030)

8. Remove Flexible Guide Fixer C.

(2 fastening screws)

9. Remove the Y Rail Cover Support.

(2 fastening screws)

→

Continued on next page

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments