manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 229 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 229

Steel Belt

Screws

Screw

Screw

 Tensioning Screws

X Motor Assembly

R E P 1 2 2 0

Model Name:

RJ–4100

R E P 1 2 2 0

Model Name:

RJ–4100

How to replace the Pressure Assembly, Pressure Roller and Blade

How to replace the Pressure Assembly, Pressure Roller and Blade

GO TO

TEST NO

1001

TEST5

1000

TEST3

Item

Replacement and Adjustment Procedure

1. Replacement

Procedure

229

Replacing the Pressure Assembly

1. Remove right and left covers.

(Refer to REP1010)

2. Remove panel cover.

(Refer to REP1030)

3. Remove Front cover.

(Refer to REP1020

4. Remove Y rail cover.

(Refer to REP1030)

5. Remove Front paper guide
6. Remove Rear paper guide
7. Loosen two steel belt tensioning screws.

8. Remove one steel belt fastening screw.
9. Remove the steel belt.

CAUTION: Be careful not to cut your finger on the end of

the steel belt.

10. Remove the Y motor assembly. (3 screws)

→

Continued on next page

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments