manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 43 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 43

E N T 1 1 4 0

Model Name:

RJ–4100

E N T 1 1 4 0

Model Name:

RJ–4100

Printer Status Messages

When Message is Displayed

1

2

• Check Waste Fluid Box

These messages mean that the waste
fluid tank is filled with waste fluid.

• Waste Fluid Box Full

These messages mean that the waste
fluid tank is filled with waste fluid.

1-1

• Is the waste fluid tank filled with waste fluid?

→

Pull out the waste fluid box and replace it with a new one. Be careful not to soil your hands and clothes with
waste fluid. 

CAUTION: Even if the absorbent material is not replaced, this warning message will be cancelled

when you answer [Yes] to the question "Has it been replaced?", so please answer [Yes]
whenever the waste fluid box is replaced.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP1000

No.

Symptom

Sequence

Items to be Confirmed

When Message is Displayed

Printer Status Messages

43

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments