manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 221 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 221

R E P 1 1 4 1

Model Name:

RJ–4100

R E P 1 1 4 1

Model Name:

RJ–4100

How to replace the Main Board Assembly

How to replace the Main Board Assembly

GO TO

TEST NO

1000

TEST2

Item

Replacement and Adjustment Procedure

4. Install latest

program

5. Install backup

parameters

221

4. Install the latest program. (Refer to REP1600)

5. Install the backup parameters that were taken up in Step 1 in the

new Main Board. (Refer to REP1590)

CAUTION:
If backup parameters were not taken up in Step 1, enter
them manually.
For the user setup list, refer to the section on “How to set
parameters” in the Users Guide and Functional Operation
Edition.
Also, for adjustment parameters, refer to BAC5020 (parame-
ter update)

CAUTION:
Replace the “Waste Fluid Box” if backup parameters were
not taken up in Step 1. (Refer to REP1460)
The message “Change Tank?:” will appear on the panel dis-
play. You should confirm by answering “Yes”.

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments