manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 251 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 251

R E P 1 3 7 1

Model Name:

RJ–4100

R E P 1 3 7 1

Model Name:

RJ–4100

How to replace the Ink Tubes

How to replace the Ink Tubes

GO TO

TEST NO

1000

TEST2

Item

Replacement and Adjustment Procedure

2. Adjustment

and
Examination
Procedure

251

1. Carry out the initial filling.

(Refer to BAC2040)

CAUTION:

Wait at least 30 minutes after the initial fill-
ing before printing.  Otherwise the printing
quality can not be assured.

2. Carry out a test print. (TST1002, test 8)
3. Fit a new Waste Fluid Box. (Refer to BAC2040)

CAUTION:

About 100 cc of waste fluid will be expelled
into the Waste Fluid Box from head cleaning
and initial filling.  Fit a new Waste Fluid Box.
(Refer to REP1460)  The message “Change
Tank?:” will appear on the panel display.
You should confirm by answering “Yes”.

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments