manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 62 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 62

E N T 2 0 6 1

Model Name:

RJ–4100

E N T 2 0 6 1

Model Name:

RJ–4100

Trouble with Initialization

When No Error is Displayed on the Printer's Liquid Crystal Display

2

• Data is received but not printed

2-1

• Investigate the current printer connection environment and report a printout of the setting details, together with

printing data that will enable the symptoms to be verified, to your local dealer.

• For how to take a print of the setting details, refer to "Test and setup printing" under "Printer settings and spe-

cial functions" in the Operation Manual.

• Data for printing should be able to be analysed by the printer.

If it can not be dumped to a file by CAD and the driver, a data dump list from a comparatively simple diagram
will be satisfactory. 
However, the data should enable the symptoms to be verified.

• Please include in the printer connection environment: the host computer, name of CAD, type of driver, the inter-

face being used, length of cable, whether or not there is a switching unit.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP2000

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Trouble with Initialization

62

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments