manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 86 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 86

E N T 5 0 2 0

Model Name:

RJ–4100

E N T 5 0 2 0

Model Name:

RJ–4100

Problem Involving Noise

When No Error is Displayed on the Printer's Liquid Crystal Display

1

• Abnormal noise when head is moving

left and right

1-1

• Does the noise occur at the same time as the print head is printing?

The head of this ink jet printer uses piezo electric elements and it is the vibration of the piezo electric elements
that ejects the inks.
When a particularly large number of nozzles are ejecting at the same time and when the printing ratio is high,
the piezo vibration increases accordingly.
The vibration emits a noise like oscillation but this does not affect performance.

→

Explain these circumstances.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP5000

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Problem Involving Noise

86

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments