manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 106 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 106

E N T 8 0 5 0

Model Name:

RJ–4100

E N T 8 0 5 0

Model Name:

RJ–4100

Other

When No Error is Displayed on the Printer's Liquid Crystal Display

1

2

3

• Ink has overflowed from the waste

fluid box

• Ink overflows from flushing box

• Ink is split around the X-rail

1-1

• The waste fluid box is to be replaced periodically.

If it is not replaced when "Waste Box Full" is displayed and a "Yes" response to the question "Waste Box
Replaced?" is entered, the waster fluid quantity counter will be reset. Further use in this condition will cause the
waster fluid box to overflow. 

→

The waste fluid box (a separate cost item) must be replaced when "Waste Box Full" is displayed.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP8000

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Other

106

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments