manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 240 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 240

T Fence

Screws

R E P 1 3 0 0

Model Name:

RJ–4100

R E P 1 3 0 0

Model Name:

RJ–4100

How to replace the T Fence

How to replace the T Fence

GO TO

TEST NO

1001

TEST4

1000

TEST2

Item

Replacement and Adjustment Procedure

1. Replacement

Procedure

2. Cleaning

Procedure

240

Replace the T Fence

1. Remove the Panel Cover.

(Refer to REP1030)

2. Remove the Front Cover.

(Refer to REP1020)

3. Remove the Y Rail Cover.

(Refer to REP1030)

4. Loosen the 10 screws holding the T Fence Pressure Plate and

remove the T Fence.

CAUTION: Mind the Head Board and take out the T

Fence on the X Motor side.

5. Assembling is the reverse of the removal procedure. 

How to clean the T Fence

1. Gently wipe the T Fence with a lint-free cloth which has been

wet with water or ethanol. (Lint-free cloth is closely woven from
extremely fine threads and has no nap and produces no dust.)

CAUTION: When wiping the T Fence, be careful not to

rub it vigorously.

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments