manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 33 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 33

E N T 1 0 3 0

Model Name:

RJ–4100

E N T 1 0 3 0

Model Name:

RJ–4100

Printer Status Messages

When Message is Displayed

1

• [User 1] Media End

This message is displayed when no
media is mounted or printing in cut
media mode has been completed.

1-1

1-2

• Is the lever down with no media mounted, or has printing in cut media mode been completed?

→

Mount new recommended media.

• When cut media is being mounted, is it placed so that it covers the sensor that detects the trailing edge of the

media? 

→

When cut media is being mounted, push it right back until the media suction fan starts to turn and then try
again.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP1000

No.

Symptom

Sequence

Items to be Confirmed

When Message is Displayed

Printer Status Messages

33

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments