manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 79 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 79

E N T 4 0 9 0

Model Name:

RJ–4100

E N T 4 0 9 0

Model Name:

RJ–4100

Trouble with Printing

When No Error is Displayed on the Printer's Liquid Crystal Display

1

• Inaccurate line length in the direction

of head movement (Main scanning
direction)

1-1

• Are the environmental conditions within the recommended range for guaranteed working (Temperature: 16°C to

25°C, Humidity 50% to 60%, no condensation)? 

→

Bring environmental conditions with the guaranteed range. 

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP4000

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Trouble with Printing

79

Direction of media feed

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments