manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 260 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 260

Head Mount

Fastening 
screw

Fastening 
screw

Cursor Plate Spring

R E P 1 4 4 0

Model Name:

RJ–4100

R E P 1 4 4 0

Model Name:

RJ–4100

How to replace the Cursor Assembly

How to replace the Cursor Assembly

GO TO

TEST NO

1001

TEST4

1000

TEST2

Item

Replacement and Adjustment Procedure

1. Replacement

Procedure

260

Replace the Cursor Assembly

1. Remove the Front Cover.

(Refer to REP1020)

2. Remove the Panel Cover.

(Refer to REP1030)

3. Remove the Y Rail Cover.

(Refer to REP1030)

4. Remove the Right and Left Covers. (Refer to REP1010)
5. Loosen the tension of the Steel Belt. (Refer to REP1290)
6. Disconnect connectors J204, J206, J207 and J208 from the

Head Board Assembly.

7. Remove the Y Cable.

(Refer to REP1360)

8. Remove the Ink Tubes.

(Refer to REP1370)

9. Remove the Head Cover.

(Refer to REP1060)

10. Remove the two Steel Belt fastening screws from the Cursor

unit.

(Refer to REP1290)

11. Remove the setscrew and remove each damper tube.

(Refer to REP1430)

12. Remove the Head Mount. (2 fastening screws)

CAUTION: Be careful not to touch or damage the Head

Nozzles.

13. Remove the Cursor Plate Spring.
14. Lift up the Head Board Mounting Plate and take it from the

Cursor.

CAUTION: Be careful not to damage the Timing Fence

and Sensor which are underneath the Head
Board.

15. Remove the Cursor. 
16. Assembling is the reverse of the removal procedure.

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments