manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 201 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 201

E X A 8 0 5 0

Model Name:

RJ–4100

E X A 8 0 5 0

Model Name:

RJ–4100

Other

When No Error is Displayed on the Printer's Liquid Crystal Display

1

2

3

• Ink has overflowed from the waste fluid

box

• Ink overflows from flushing box

• Ink is spilt around the X rail

1-1

1-2

1-3

1-4

1-5

2-1

2-2

3-1

• Check inside the waste fluid box. If it is full of ink, explain to the customer as you replace the waste

fluid box.

• Use the self-diagnostic "Sensor: No Ink" to check the cartridge that has no ink.

→

Remove all cartridges and check that the "No Ink" display changes when you gently press the
black plastic switches of the detector assemblies (Bk, C, M and Y) on and off.

• Use the printer's self-diagnostic "Sensor: Box Exist/Box is not" to make sure that the waste fluid box

detection is working normally.

→

Slowly remove and replace the waste fluid box to confirm that the present/absent display
appears.

→

If the display is not normal, the sensor mounting position may be at fault.
Remove the R Cover and adjust the mounting position of the waste fluid box detection switch
assembly.

• Check the waste fluid box detection switch contact.

J109 (INK TANK) on the main board

→

Insert it correctly.

→

Replace it.

• Is the waste fluid tube from the flushing box kinked?

→

Fix it and attach it again.

• Is the flushing box choked with trash?

→

Remove the trash.

→

Replace it.

• The extension tube under the pump assembly may have come away.

→

Remove the maintenance station GA assembly and check whether the extension tube has come
away.

→

Replace the pump assembly.

→

Replace the pump motor assembly.

→

Replace the cap assembly.

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Other

1460

1350

1120

1120

1270

1040

1040

R E P

B A C

G O   T O   R e f .   P a g e s

201

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments