manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 268 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 268

Standard base

Slide

Platen

Adjusting screw

Measuring position (rib)

Standard value : 0

Rail height jig

R E P 1 5 2 0

Model Name:

RJ–4100

R E P 1 5 2 0

Model Name:

RJ–4100

How to Adjust the Platen Height

How to Adjust the Platen Height

GO TO

TEST NO

Item

Replacement and Adjustment Procedure

1. Adjustment

and
Inspection
Procedure

268

Platen Height Adjustment

1. Adjust the rail height jig. (Refer to REP1610) 

Mount the rail height jig on the standard base and set the
dial gauge to “0”.

Mount the rail height gauge over the ribs at both ends of the
platen, loosen the platen retaining screws and adjust the
platen up and down until the dial gauge reads 2.6 to 2.7 mm.

Standard value
2.6 to 2.7 mm by dial gauge

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments