294
T S T 1 0 0 0
Model Name:
RJ–4100
T S T 1 0 0 0
Model Name:
RJ–4100
Test Procedures (Test 1 to Test 3)
Test Procedures (Test 1 to Test 3)
Item
Test Procedure
Test 1:
Printing from User's Host
Computer
Test 2 :
Print a Test Print
Test 3:
Skew Check
1. With the cooperation of the user/operator, have the user's data printed in the user's operating environment.
2. Check that the printing is normal.
1. Load A3 size media in the printer.
2. Print a “Test Print”. Press the [Resolution] key while you hold down the [Shift] key.
3. Check that the printing is normal. (Refer to PAT1000 for checking printing quality)
1. Load roll media in the printer (thick coated paper).
2. Select “Adjustments/Skew Verification” from the self-diagnostics menu. (Refer to BAC2030)
3. When “Please input paper feed length [m] (default 1.0 m)” is displayed, set the paper feed length
using the “Setting Value +” key to increase the setting or “Setting Value -” key to decrease the setting.
4. End if “Measurement result
±
✼
.
✼✼✼
,
±
✼
.
✼✼✼
” (skew values on left and right sides of the media) are both within
the standard values shown below.
5. Switch off the power when the test is completed.
Standard values
Within
±
1.5 mm
Within
±
2.5 mm
Within
±
10 mm
Roll Media
Cut Media
Conditions
7m
50m
Standard values
Specified Media
Thick
coated
paper