manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 374 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 374

374

B A C 2 1 6 0

Model Name:

RJ–4100

B A C 2 1 6 0

Model Name:

RJ–4100

Head Cleaning

Head Cleaning

This procedure is used at the end of the production process or before prior to head
replacement.
Note: For color head cleaning, you will be asked to confirm that all color cartridges

have been removed and to install the cleaning jig.  Also, if you suspect the
cartridge sensor to be faulty, you can carry out the following procedure by
pressing the [ENTER] key.

AJST: Head Cleaning

Wash: Black & Color

[Menu Down] is Color only

Menu Down

Menu Up

Wash: Black  

Menu Down

Menu Up

Wash: Color

[Menu Up] is Black & Color  

 

Press [ENTER] to continue

Rm Cartridge K

After black cartridge has been removed

Install Cleaning Jig

After cleaning jig has been installed

Head Cleaning in Progress

After cleaning fluid has been extracted  

Remove Cleaning Jig

After cleaning jig has been removed

Head Cleaning in Progress 

After head cleaning has been completed, the display will move to “AJST: Home”.

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments