297
T S T 1 0 0 3
Model Name:
RJ–4100
T S T 1 0 0 3
Model Name:
RJ–4100
Test Procedures (Test 10 to Test 11)
Test Procedures (Test 10 to Test 11)
Item
Test Procedure
Test 10:
Panel Test
Test 11:
Fan Operating Test
1. Verify “Key Input Check” when “Panel Test” is displayed in the “Examination/Panel” self-diagnostic menu.
(Refer to BAC1030)
2. Shift from key input test to “LCD Check” by pressing the “Enter” key.
3. Shift to “LED/Buzzer Check” by pressing the “Next Menu” key during the LCD test.
4. Check that “Keys”, “LCD” and “LED/Buzzer” are all working normally.
Note:
If you wish to stop the panel test, press the “Back” key.
5. Switch off the power when the test is completed.
1. Remove the front paper guide. (Refer to BAC1040)
2. Use the self-diagnostic “Examination/Fans” to test that fans switch on and off. (Refer to BAC1060)
3. Check by observing that the fans turn.
To check with the front paper guide attached, carry out the following procedure:
Mount one A4 sheet to the right, one A3 sheet in the center and one A3 sheet to the left on the paper guide and
check that the paper is held down by the fans.