manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 41 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 41

E N T 1 1 2 0

Model Name:

RJ–4100

E N T 1 1 2 0

Model Name:

RJ–4100

Printer Status Messages

When Message is Displayed

1

• Not Filled

This message means "Initial filling has
not been done"

1-1

• This message will be displayed when power is switched on at the time of delivery and after head cleaning. 

→

Install the four ink cartridges.
At this time, if even one cartridge is not installed, "[KCMY] Cartridge" will appear.
Initial filling begins automatically when all four cartridges have been installed.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP1000

No.

Symptom

Sequence

Items to be Confirmed

When Message is Displayed

Printer Status Messages

41

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments