manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 206 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 206

R E P 1 0 1 0

Model Name:

RJ–4100

R E P 1 0 1 0

Model Name:

RJ–4100

How to remove and replace the Right and Left Covers

How to remove and replace the Right and Left Covers

GO TO

TEST NO

Item

Replacement and Adjustment Procedure

1. Removal,

Replacement

206

❈

Before carrying out this operation, switch off the power supply and remove the power
plug.

❈

Before removing the covers, remove roll media with scroller from scroller receiver.

Right Cover

1. Remove four screws.
2. The cover is caught at the place shown by arrow A. Remove the cover while lifting in the

direction of arrow B.

3. Assembling is the reverse of the removal procedure.

Left Cover

1. Remove in the same way as for the Right Cover.

A

B

Screw

Screw

Cover R

Cover R

Screws

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments