manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 37 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 37

E N T 1 0 7 0

Model Name:

RJ–4100

E N T 1 0 7 0

Model Name:

RJ–4100

Printer Status Messages

When Message is Displayed

1

• Not enough memory SIMM

✼✼

MB

(Intermediate code buffer overflow)
When this printer has insufficient
memory for the amount of data sent
by the personal computer, this mes-
sage indicates the required memory
size.

1-1

1-2

2-1

2-2

Check:

Which of the following applies to the error?

No extended memory

Go to Step 2-1

Extended memory fitted

Go to Step 1-2

Check:

In the memory capacity that is printed on the list of setting details, is it only the extended memory that is
increased?

Not increased

→

The printer will not be aware of extended memory if it is inserted in the
wrong slot.
Please check whether the extended memory is in the proper slot.

Increased

Go to Step 2-2

Reference:

For details on how to mount extended memory, please refer to "Installing Options" in
the Applications Operating Manual.

Treatment: When the printer was developed, printing data transmitted from HOST was sometimes too great to

be accommodated in memory.

Since the display shows the memory required to plot the data on the screen, advise the user to pro-
cure at least this amount of memory.

Reference:

For details on how to mount extended memory, please refer to "Installing Options" in
the Applications Operating Manual.

Treatment: The extended memory that has been procured may be faulty.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP1000

No.

Symptom

Sequence

Items to be Confirmed

When Message is Displayed

Printer Status Messages

37

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments