manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 93 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 93

E N T 6 0 4 0

Model Name:

RJ–4100

E N T 6 0 4 0

Model Name:

RJ–4100

Trouble with Media Cutting

When No Error is Displayed on the Printer's Liquid Crystal Display

1

• Inaccurate media cutting

1-1

1-2

1-3

1-4

• Is the cutter blade chipped or deteriorated as checked in the primary consultation?

→

Refer to the item on "Daily Maintenance" in the Operation Manual and carry out daily maintenance, then try
again.

• Has the cutter cap been fixed securely on the top of the cutter as a result of checking in the primary consulta-

tion?

→

Fit the cutter cap securely.

• Does the cutter move up and down smoothly?

→

If it does not move up and down smoothly it will need to be serviced as there may be foreign matter imped-
ing the movement.

• Is there foreign matter in the cutter groove and front surface of the printing board section?

→

Remove the foreign matter.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP6000

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Trouble with Media Cutting

93

X

The media cutting accuracy
for this plotter is x 

≤

 0.3 mm.

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments