manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 208 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 208

R E P 1 0 3 0

Model Name:

RJ–4100

R E P 1 0 3 0

Model Name:

RJ–4100

How to remove and replace the Panel Cover and Y Rail Cover

How to remove and replace the Panel Cover and Y Rail Cover

GO TO

TEST NO

Item

Replacement and Adjustment Procedure

1. Removal,

Replacement

208

Panel Cover

1. Loosen the two screws on the Front Cover Right Cover Shaft and

push the Front Cover to the left

2. Loosen the Panel Cover Screw by 3 mm or remove it.
3. Slide the Panel Cover to the left (in the direction of arrow A) and

remove it towards you (in the direction of arrow B). 

4. Assembling is the reverse of the removal procedure.

Y Rail Cover

1. Remove the Panel Cover.

(Refer to REP1030)

2. Remove the Front Cover.

(Refer to REP1020)

3. Remove the Cartridge Cover. (2 screws)
4. Remove the Y Rail Cover Screws (5 screws).
5. Remove the Y Rail Cover by lifting it upwards. 
6. Assembling is the reverse of the removal procedure.

B

A

Screw

Panel Cover

Y Rail Cover

Y Rail Cover

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments