manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 315 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 315

315

G I D 3 0 1 0

Model Name:

RJ–4100

G I D 3 0 1 0

Model Name:

RJ–4100

Explanation of Boards

Explanation of Boards

1. Board System

Note:
The last digit of the board number shown above will be changed when a new edition of a board is issued. You will be notified of these changes but please take care when replacing a board.

2. Optional Boards

3. Explanation of Boards

3.1 Main Board (DF-41524)

The Main Board, located in the Control Box of the printer, controls the Head Board on the carriage unit and the Panel Board in the cover section. 
The controller is a 64-bit RISC processor.
Memory is 8 MB DRAM, with 1 MB allocated for the input buffer, 2 MB for the intermediate code buffer and 3 MB for banding memory.
the 2 MB intermediate code buffer is enough for two- to five- hundred thousand MH-GL line segment data.
Power supplies are +5 V, +24 V and +42 V.

Principal functions of the Main Board are:
• To interface with external devices
• To convert of vector data to raster data
• To control transfer of inkjet head raster data
• To control panel display
• To monitor all sensor information
• To control X motor (+24 V), Y motor (+24 V), fans (+24 V), solenoids (+24 V)
• To handle all control parameters
• To generate head signals (+42 V), pump motor (+42 V)

Board Name

Board Number

External View Reference Page

Main Board Assembly

DE-41524

GID3020

Head Board Assembly

DE-41525

GID3030

Panel Board Assembly

DE-40097

GID3040

Mother Board Assembly

DE-40098

GID3050

Power Board Assembly

DE-40095

GID3060

Junction Board Assembly

DF-41536

GID3070

Name

Type

Extended I/F

Ethernet Board

RJ8-ETH13/RJ8-ETH13-EX

Extended Memory

Extended Memory (8 MB)

SIM8M

Extended Memory(16 MB)

SIM16M

Extended Memory (32 MB)

SIM32M

Standard equipment specification for overseas models is SIM 8 M 
installed in Slot-1 on the Main Board Assembly.

❈

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments