Third line
Second line
First line
Media eject
direction
Plus Minus
R E P 1 5 8 2
Model Name:
RJ–4100
R E P 1 5 8 2
Model Name:
RJ–4100
How to Adjust the Tilt and Depth of the Print Head (Color)
How to Adjust the Tilt and Depth of the Print Head (Color)
GO TO
TEST NO
Item
Replacement and Adjustment Procedure
1. Adjustment
and
Verification
280
12. Implement the “Color Head Tilt Verification”.
Repeat Steps 9 and 10 until the positioning matches that of
the Black Head.
13. After completing the tilt adjustment, press [Back] to return to
the previous menu.
14. Implement “Repeatability Printing Positioning”. (Refer to
BAC2080)
This will run single-pass, bidirectional printing three times
and compensate for any offset of the second line (CCW
printing) relative to the first and third lines (CW printing).
15. Check the printing and enter a positive value to move the
second line (CCW printing) towards the Cap, or a negative
value to move it in the opposite direction. Register first for
Black, then for Color. (After registering, the printer will print
again.)
Repeat until all bidirectional printing is aligned.
16. After completing Repeatability Printing Positioning, press
[Back] to return to the previous menu.
→
Continued on next page (Go to REP1583)