manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 88 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 88

E N T 5 0 4 0

Model Name:

RJ–4100

E N T 5 0 4 0

Model Name:

RJ–4100

Problem Involving Noise

When No Error is Displayed on the Printer's Liquid Crystal Display

1

• Abnormal noise when cutting

1-1

1-2

1-3

• Is the cutter cap fitted securely over the cutter holder.

→

Fit the cutter cap securely.

• Does the cutter holder move up and down smoothly?

→

If it does not move up and down smoothly it will need to be serviced as there may be foreign matter imped-
ing the movement.

• Is there foreign matter stuck to the platen unit (printing board) or the cutting groove and surface?

→

Remove the foreign matter.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP5000

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Problem Involving Noise

88

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments