manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 210 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 210

Right Side Cap

Front Box

Left Side Cap

R E P 1 0 4 1

Model Name:

RJ–4100

R E P 1 0 4 1

Model Name:

RJ–4100

How to remove and replace the Right Side Cap and Left Side Cap

How to remove and replace the Right Side Cap and Left Side Cap

GO TO

TEST NO

Item

Replacement and Adjustment Procedure

1. Removal,

Replacement

210

Right Side Cap

1. Remove the Front Paper Guide.

(Refer to REP1040)

2. Bring the Head to the middle.
3. Hold up the Front Box.
4. Remove two screws from the Front Side Cap.
5. Turn the Right Side Cap clockwise and remove it.
6. Refitting is the reverse of the removal procedure.

Left Side Cap

1. Remove the Front Paper Guide.

(Refer to REP1040)

2. Remove three screws from the Left Side Cover.
3. Remove two screws from the Side Cap.
4. Remove the Left Side Cap upwards.
5. Refitting is the reverse of the removal procedure.

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments