manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 264 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 264

R E P 1 4 8 0

Model Name:

RJ–4100

R E P 1 4 8 0

Model Name:

RJ–4100

Network Interface Board

Network Interface Board

GO TO

TEST NO

1000

TEST1

Item

Replacement and Adjustment Procedure

1. Replacement

Procedure

264

CAUTION: Before starting work, be sure to disconnect

the power supply cable connector.

Network Interface Board (Optional Item)

1. Disconnect all Ethernet communications cables.
2. Remove the 2 screws holding the Ethernet board and pull out

the board towards you. 

3. Refitting is the reverse of the removal procedure.

Ethernet Board

Screws

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments