manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 51 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 51

E N T 1 5 3 0

Model Name:

RJ–4100

E N T 1 5 3 0

Model Name:

RJ–4100

CPU System Faults

When Message is Displayed

1

• E129 Error NVRAM

This message indicates that a fault
has occurred in the NVRAM on the
Main board that records printer set-
tings.

1-1

• Printer settings are faulty.

→

It is possible that strong noise has been received from outside the printer. Check the AC power supply and
equipment around the printer then try again after switching the printer off and on.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP1700

No.

Symptom

Sequence

Items to be Confirmed

When Message is Displayed

CPU System Faults

51

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments