manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 53 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 53

E N T 1 7 1 0

Model Name:

RJ–4100

E N T 1 7 1 0

Model Name:

RJ–4100

Mechanical System Faults

When Message is Displayed

1

• E066 Error Y Motor

This message indicates that a fault
has occurred in the head movement
motor (Y axis) while the printer was
working.
This occurs when there is a large dif-
ference between the motor command
value and encoder feedback value.

• E070 Error Y Encoder

This message indicates that a fault
has occurred in the amount of head
movement (Y axis) while the printer
was working.
This occurs when there is no encoder
feedback.

• E072 Error Y Time out

This message indicates that a timeout
has occurred in the amount of head
movement (Y axis) while the printer
was working.
This occurs when the carriage has not
reached its designated position.

• E074 Error Y Overcurrent

This message indicates that a fault
has occurred due to an overload of
the head movement (Y axis) motor
while the printer was working.

1-1

1-2

• When it is installed, are the head mounting and cable keeper removed?

→

Remove the head mount and cable keeper, then switching on and try again.

• The head movement system is faulty.

Check that there is no foreign matter in the head movement unit.

→

Switch off the printer, remove any foreign matter from the head movement unit, then switch on and try again.  

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP1700

No.

Symptom

Sequence

Items to be Confirmed

When Message is Displayed

Mechanical System Faults

53

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments