manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 380 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 380

B A C 5 0 2 1

Model Name:

RJ–4100

B A C 5 0 2 1

Model Name:

RJ–4100

How to Update the Capping Position Parameter

How to Update the Capping Position Parameter

This procedure will update the capping position parameter.

380

UPDATE: Home

If [Back] is pressed instead of the second [ENTER], a message that 
the parameter is not updated will appear and the display will move to “UPDATE: Home”   

Home:

-2162

Param Update?

Updated Parameter

Use the VALUE + and - keys to change 
the setting

After this display, the next menu will 
appear

If there is a change, a confirmation message will 
appear when you press [ENTER]

The update message will appear when you press [ENTER]

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments