manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 50 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 50

E N T 1 5 2 0

Model Name:

RJ–4100

E N T 1 5 2 0

Model Name:

RJ–4100

CPU System Faults

When Message is Displayed

1

2

3

4

5

6

7

8

9

• E016 CPU Err [10] (Reserved command

exception error)
Indicates that a reserved command has
caused an error.

• E016 CPU Err [11] (Unable to use

coprocessor exception error)
Indicates that the coprocessor has caused
an error.

• E016 CPU Err [12] (Operation overflow

exception error)
Indicates that an overflow has occurred.

• E016 CPU Err [13] (Trap exception error)

Indicates that a trap has occurred.

• E016 CPU Err [15] (Floating point excep-

tion error)
Indicates that a floating point error has
occurred.

• E016 CPU Err [22] (Watch exception

error)
Indicates that the watch has caused an
error.

• E016 CPU Err [32] (Watchdog timeout

exception error)
Indicates that a watchdog timeout has
occurred.

• E016 CPU Err [33] (Abort error)

Indicates that an abort has occurred.

• E237 Err Transfer Memory (Transfer

memory error/Transfer memory access
error)
Indicates that a fault has occurred in
transferring printing data that has been
analysed.

1-1

• The CPU on the Main Board Assembly is faulty.

→

It is possible that strong noise has been received from outside the printer. Check the AC power supply and
equipment around the printer then try again after switching the printer off and on.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP1500

No.

Symptom

Sequence

Items to be Confirmed

When Message is Displayed

CPU System Faults

50

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments