manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 381 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 381

B A C 5 0 2 2

Model Name:

RJ–4100

B A C 5 0 2 2

Model Name:

RJ–4100

How to Update the Head Rank Parameter

How to Update the Head Rank Parameter

This procedure will update the head rank parameter.

381

UPDATE: Head Rank

If [Back] was pressed, a message that the parameter is not updated will 
appear and the display will move to “UPDATE: Head Rank”.

Black Rank:

15218

Color Rank:

17116

Param Update?

Update Parameter

Use the VALUE + and - keys to change the 
setting and press [ENTER] to confirm the change.

Use the VALUE + and - keys to change the 
setting and press [ENTER] to confirm the change.

After this display, the next menu will appear

If there is a change, a confirmation message will appear 
when you press [ENTER].

The update message will appear when you press [ENTER]

Menu Up

Menu Down

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments