manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 18 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 18

18

C O N 5 0 1 0

Model Name:

RJ–4100

C O N 5 0 1 0

Model Name:

RJ–4100

How to Clean the Printer Main Unit

How to Clean the Printer Main Unit

RJ-4100 printer should be wiped free of dirt with a dry
soft cloth.

Plotting Board

Cutting Groove

Use a soft damp cloth to wipe away
any paper fluff adhering to the print-
ing board and cutting groove.

♦

The power switch of the RJ-4000 series printer should be switched off 
during cleaning.

♦

Don’t use solvents such as thinners or benzene that will damage the finish.

♦

Covers that are fixed with screws contain electrical components and 
must not be opened during cleaning. 

♦

Paper dust which is produced when the printer is working should be 
removed periodically. Make sure that it does not get blown around.

♦

Stubborn dirt that is difficult to remove may be removed with a lint-free 
cloth dampened with alcohol.

CAUTION:

♦

Paper dust and fluff will accumulate with long term use and stick to 
the plotting board and cutter groove and may cause printing quality and 
cutting performance to deteriorate.
They must be cleaned periodically.

IMPORTANT:

Brush

Grid Roller

Use a soft damp cloth to wipe away
any paper dust sticking to the pres-
sure roller.
Clean the grid roller with a nylon
brush.

♦

Paper fluff sticking to the pressure roller and movable roller may prevent 
normal feeding of the media and produce a “Skew Check Error”.
They must be cleaned periodically.

IMPORTANT:

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments