manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 67 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 67

E N T 4 0 0 0

Model Name:

RJ–4100

E N T 4 0 0 0

Model Name:

RJ–4100

Trouble with Printing

When No Error is Displayed on the Printer's Liquid Crystal Display

1

• Does not print continuously

1-1

1-2

1-3

2-1

Confirm:

Is the panel data LED lit when data for the second and subsequent prints is being sent?

No:

Is the number of copies set to 1 on the driver side?
Is the driver stopped at the transmission confirmation screen? 

Yes:

Go to 1-2

Confirm:

After the reception of data for printing has been completed, can it be printed if the reception timeout time has been
exceeded?

Yes:

When the reception timeout time is long, it will take a long time for the data to be printed.
Change the reception timeout setting to any time you wish.

No:

Go to 1-3

Reference:

Refer to "Menu” in “Printer settings and special functions” of the Operation Manual for details on
how the reception timeout operates.

Confirm:

Are the panel and remote panel utility operating between the end of the current plot and the sending of the next

printing data?
Yes:

Investigate the function that operated and if it affects the printing, try restoring its former setting.

No:

Go to 2-1

Treatment:

Investigate the current printer connection environment and report a printout of the setting details, together with
printing data that will enable the symptoms to be verified, to your local dealer using the prescribed format.
•

For how to take a print of the setting details, refer to "Control panel” in the Operation Manual.

•

Data for printing should be able to be analysed by the printer. If it can not be dumped to a file by CAD
and the driver, a data dump list from a comparatively simple diagram will be satisfactory. (However, the
data should enable the symptoms to be verified.)

•

Please include in the printer connection environment: the host computer, the application, type of driver,
the interface being used, length of cable, whether or not there is a switching unit.

❈

If the above procedures do not improve the symptoms, the power supply section connections may be faulty or the power
board etc. may have developed a fault.

Go to MAP4000

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Trouble with Printing

67

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments