manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 211 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 211

R E P 1 0 5 0

Model Name:

RJ–4100

R E P 1 0 5 0

Model Name:

RJ–4100

How to open and close the Control Box

How to open and close the Control Box

GO TO

TEST NO

Item

Replacement and Adjustment Procedure

1. Removal,

Replacement

211

❈

Since the Control Box will hit the roll media when it is
opened and can not be opened completely, the scroller
must be removed.

Open the Control Box

1. Remove the three screws holding the Control Box.

❈

Since the Control Box will fall open when the three fastening
screws are removed, support it with your hand as you
remove the screws.

2. Assembling is the reverse of the removal procedure.

Control Box

Screws

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments