manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 61 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 61

E N T 2 0 6 0

Model Name:

RJ–4100

E N T 2 0 6 0

Model Name:

RJ–4100

Trouble with Initialization

When No Error is Displayed on the Printer's Liquid Crystal Display

1

• Data is received but not printed

1-1

1-2

1-3

1-4

1-5

1-6

1-7

1-8

1-9

1-10

1-11

• Is the front cover closed securely?

→

Close the front cover securely.

• Is there any problem with the media detection operation?

→

Try removing the media and mounting it again.

• Are the ink cartridges inserted fully?

→

Insert the ink cartridges right to the back. 

• Is "Initial filling" displayed?

→

Even if plotting data is received, it cannot be printed during initial filling 
Check that the operation has completely finished, then start the printing again.

•

Is "Cleaning" displayed?

→

Even if data is received, it will not be printed during cleaning.
Check that the operation has completely finished, then start the printing again.

• Is the interface cable loose?

→

Connect the interface securely so that there is no looseness.

• Are the interface cable connections correct?

→

Point out the need to use a cable that is appropriate to the computer and printer interface environment. 

• Is the liquid crystal display indicating that data analysis is in progress? 

→

The printer is analysing the data that has been received in order for that data to be printed. Please wait. 

• Is the type of commands in the current setup the same as the commands on the driver side?

→

Set up correctly in accordance with the settings on the driver side.

• After the reception of data for printing has been completed, can it be printed if the reception timeout time has been exceed-

ed? 

→

Yes: when the reception timeout time is long, it will take a long time for the data to be printed.
Set the reception timeout time to any time you want.

Reference:

Refer to "User settings: Online timeout" item in the Functions and Operations section of the Operation Manual
for details on how the reception timeout operates.

• The interface setting may be faulty.

→

Go to ENT7000

→

Go to next page 

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Trouble with Initialization

61

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments