manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 369 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 369

369

B A C 2 1 1 0

Model Name:

RJ–4100

B A C 2 1 1 0

Model Name:

RJ–4100

How to Adjust the Flush Pointer

How to Adjust the Flush Pointer

This procedure is used to adjust the position of black or color flushing into the flush-
ing box. The adjustment causes flushing into the flushing box and from the results
the position for black or color flushing will be entered in 720 dpi units. Enter a posi-
tive value to shift the flushing position towards the capping side, or a negative value
for the opposite direction.

AJST: Flushing Box

 

  

Press [ENTER] to update the settings. 
If a change has been made, flushing will be repeated. If [ENTER] was pressed with no change 
having been made, the display will move to the “AJST: XLength” menu.

Flushing

Black Pointer: -134

Color Pointer: 840

Flushing finished

Setting can be specified in 1 pulse units 
using the VALUE + and - keys 
(- for capping side, + for opposite side)

Menu Down

Menu Up

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments