manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 167 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 167

E X A 4 0 4 0

Model Name:

RJ–4100

E X A 4 0 4 0

Model Name:

RJ–4100

Trouble with Printing

When No Error is Displayed on the Printer's Liquid Crystal Display

1

• The entire surface is printed black

1-1

1-2

1-3

1-4

1-5

• Check the connections for head cables 1 and 2. 

Are they inserted obliquely? Are they locked securely? Check.
J207 (HEAD BK) and J208 (HEAD COL) on the head board assembly

→

Reconnect the connectors.

→

Replace head cables 1 and 2.

• Check the Y cable connections

→

Are they inserted obliquely? Check.
J201 (MAIN1) and J202 (MAIN2) on the head board assembly.
J114 (HEAD1) and J115 (HEAD2) on the main board assembly.

→

Insert the connectors again.

→

Replace both Y cables 1 and 2.

• The head board may be damaged.

→

Replace it.

• The head may be damaged.

→

Replace the black print head.

→

Replace the color print head.

• The main board may be damaged.

→

Replace it.

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Trouble with Printing

1400

1360

1420

1390
1400

1140

R E P

B A C

G O   T O   R e f .   P a g e s

167

Bad example

Good example

CAUTION:

Main board connectors J114 (HEAD1) and J115 (HEAD2) and head
board connectors J201 (MAIN1) and J202 (MAIN2) should be
plugged in securely.
The main board may be damaged if power is applied when they are
not properly connected. 

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments