manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 263 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 263

Junction Cable

Junction Cable

Main Board 
Assembly

Junction Board 
Assembly

Fastening Screws

Fastening Screw

Fastening Screw

Ink ID Sensor
Connector

Detector Assembly 
Connector

R E P 1 4 7 0

Model Name:

RJ–4100

R E P 1 4 7 0

Model Name:

RJ–4100

How to replace the Junction Board Assembly

How to replace the Junction Board Assembly

GO TO

TEST NO

Item

Replacement and Adjustment Procedure

1. Replacement

Procedure

263

CAUTION:

How to replace the Junction Board Assembly

1. Remove the Front Cover.

(Refer to REP1020)

2. Remove the Panel Cover.

(Refer to REP1030)

3. Remove the Y Rail Cover.

(Refer to REP1030)

4. Remove the Rear Paper Guide.

(Refer to REP1040)

5. Open the board box.

(Refer to REP1050)

6. Disconnect junction cable connector J129 (INK ID).
7. Disconnect all junction board assembly connectors.
8. Remove the junction board assembly. (4 fastening screws) 
9. Assembly is the reverse of the removal procedure.

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments