manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 242 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 242

Tensioning 
screws

Head

Screws

Return Pulley

Steel Belt

R E P 1 3 2 0

Model Name:

RJ–4100

R E P 1 3 2 0

Model Name:

RJ–4100

How to replace the Y Return Pulley Assembly

How to replace the Y Return Pulley Assembly

GO TO

TEST NO

1001

TEST4

Item

Replacement and Adjustment Procedure

1. Replacement

Procedure

2. Adjustment

and
Examination
Procedure

242

Replace the Y Return Pulley Assembly

1. Remove the Panel Cover.

(Refer to REP1030)

2. Remove the Front Cover.

(Refer to REP1020)

3. Remove the Y Rail Cover.

(Refer to REP1030)

4. Remove the Left and Right Covers.

(Refer to REP1010)

5. Move the Head to the left (X Motor side).
6. Loosen the Steel Belt tension (loosen two tensioning screws).
7. Remove the Steel Belt fastening screws on the left side and

slide it out to the Return Pulley.

8. Remove the Y Return Pulley.
9. Assembling is the reverse of the removal procedure.

1. Carry out the Steel Belt Tensioning Adjustment. (Refer to

REP1550)

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments