manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 83 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 83

E N T 4 1 3 0

Model Name:

RJ–4100

E N T 4 1 3 0

Model Name:

RJ–4100

Trouble with Printing

When No Error is Displayed on the Printer's Liquid Crystal Display

1

• Bad right angle precision

1-1

1-2

1-3

1-4

• Is the media that is mounted a type that is recommended by Mutoh?

→

No guarantee can be given if the media is not media recommended by Mutoh. Please confirm after replacing
with media recommended by Mutoh.  

• Does the media that is mounted have a peculiar tendency to bend?

→

Either curb this tendency or replace it with new media and try again.

• Is the media mounted properly in the main unit? Is there any "skew" or "meander"?

→

Skew and meander are caused by wrongly mounted media and this is probably affecting accuracy. Please
confirm after remounting the media properly.

• Are paper scraps or foreign matter adhering to the pressure roller and grid roller?

→

Wipe the pressure roller with a soft damp cloth. (Refer to CON5010)

→

Clean the grid roller with a nylon brush. (Refer to CON5010)

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for
some reason.

Go to MAP4000

No.

Symptom

Sequence

Items to be Confirmed

When No Error is Displayed on the Printer's Liquid Crystal Display

Trouble with Printing

83

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments