manualshive.com logo in svg

MUTOH Falcon RJ-4100, Maintenance Manual, Page: 44 / 407

Share
Download
MUTOH Falcon RJ-4100 Maintenance Manual Download Page 44

E N T 1 1 5 0

Model Name:

RJ–4100

E N T 1 1 5 0

Model Name:

RJ–4100

Printer Status Messages

When Message is Displayed

1

• Ink type change

This message is displayed when
switching from dye ink to pigment ink
or from pigment ink to dye ink.

1-1

• Indicates that the ink type (dye or pigment) of the genuine Mutoh cartridges that have been in use up to now is

about to be changed.
If [ENTER] is pressed while "Changing ink" is displayed, the ink type will be switched from dye to pigment or
from pigment to dye.

No.

Symptom

Sequence

Items to be Confirmed

When Message is Displayed

Printer Status Messages

44

REFERENCE:

• Ink type switching takes about 10 minutes.

CAUTION:

• If ink type is changed several times, the waste fluid box will become 

full. 
If several ink type changes are to be made, we recommend that 
spare waste fluid boxes (sold separately) be obtained beforehand.

 
• When switching from pigment type to dye type ink, wait with the power 

switched off for at least six hours for the composition of the inks to 
stabilize before starting to print. To shorten the waiting time before 
starting to print, we recommend that cleaning cartridges 
(sold separately) be used to clean the head. 

• If this message appears even though the same type of genuine Mutoh cartridges are installed, the ink car-

tridges should be reinstalled.

❈

If the above procedures do not improve the symptoms, the main unit has probably developed a fault for some
reason.

GO TO MAP1000

Summary of Contents for Falcon RJ-4100
























































































































































































































































































































































































































Reviews:

No comments